package bignum;
use 5.010;
use strict;
use warnings;
our $VERSION = '0.49';
use Exporter;
our @ISA = qw( bigint );
our @EXPORT_OK = qw( PI e bpi bexp hex oct );
our @EXPORT = qw( inf NaN );
use overload;
use bigint ();
##############################################################################
BEGIN {
*inf = \&bigint::inf;
*NaN = \&bigint::NaN;
*hex = \&bigint::hex;
*oct = \&bigint::oct;
}
# These are all alike, and thus faked by AUTOLOAD
my @faked = qw/round_mode accuracy precision div_scale/;
our ($AUTOLOAD, $_lite); # _lite for testsuite
sub AUTOLOAD {
my $name = $AUTOLOAD;
$name =~ s/.*:://; # split package
no strict 'refs';
foreach my $n (@faked) {
if ($n eq $name) {
*{"bignum::$name"} =
sub {
my $self = shift;
no strict 'refs';
if (defined $_[0]) {
Math::BigInt->$name($_[0]);
return Math::BigFloat->$name($_[0]);
}
return Math::BigInt->$name();
};
return &$name;
}
}
# delayed load of Carp and avoid recursion
require Carp;
Carp::croak ("Can't call bignum\-\>$name, not a valid method");
}
sub unimport {
$^H{bignum} = undef; # no longer in effect
overload::remove_constant('binary', '', 'float', '', 'integer');
}
sub in_effect {
my $level = shift || 0;
my $hinthash = (caller($level))[10];
$hinthash->{bignum};
}
#############################################################################
sub import {
my $self = shift;
$^H{bignum} = 1; # we are in effect
# for newer Perls override hex() and oct() with a lexical version:
if ($] > 5.009004) {
bigint::_override();
}
# some defaults
my $lib = '';
my $lib_kind = 'try';
my $upgrade = 'Math::BigFloat';
my $downgrade = 'Math::BigInt';
my @import = (':constant'); # drive it w/ constant
my @a = @_;
my $l = scalar @_;
my $j = 0;
my ($ver, $trace); # version? trace?
my ($a, $p); # accuracy, precision
for (my $i = 0; $i < $l; $i++, $j++) {
if ($_[$i] eq 'upgrade') {
# this causes upgrading
$upgrade = $_[$i + 1]; # or undef to disable
my $s = 2;
$s = 1 if @a - $j < 2; # avoid "can not modify non-existent..."
splice @a, $j, $s;
$j -= $s;
$i++;
} elsif ($_[$i] eq 'downgrade') {
# this causes downgrading
$downgrade = $_[$i + 1]; # or undef to disable
my $s = 2;
$s = 1 if @a - $j < 2; # avoid "can not modify non-existent..."
splice @a, $j, $s;
$j -= $s;
$i++;
} elsif ($_[$i] =~ /^(l|lib|try|only)$/) {
# this causes a different low lib to take care...
$lib_kind = $1;
$lib_kind = 'lib' if $lib_kind eq 'l';
$lib = $_[$i + 1] || '';
my $s = 2;
$s = 1 if @a - $j < 2; # avoid "can not modify non-existent..."
splice @a, $j, $s;
$j -= $s;
$i++;
}
elsif ($_[$i] =~ /^(a|accuracy)$/) {
$a = $_[$i + 1];
my $s = 2;
$s = 1 if @a - $j < 2; # avoid "can not modify non-existent..."
splice @a, $j, $s;
$j -= $s;
$i++;
}
elsif ($_[$i] =~ /^(p|precision)$/) {
$p = $_[$i + 1];
my $s = 2;
$s = 1 if @a - $j < 2; # avoid "can not modify non-existent..."
splice @a, $j, $s;
$j -= $s;
$i++;
}
elsif ($_[$i] =~ /^(v|version)$/) {
$ver = 1;
splice @a, $j, 1;
$j--;
}
elsif ($_[$i] =~ /^(t|trace)$/) {
$trace = 1;
splice @a, $j, 1;
$j--;
}
elsif ($_[$i] !~ /^(PI|e|bexp|bpi|hex|oct)\z/) {
die ("unknown option $_[$i]");
}
}
my $class;
$_lite = 0; # using M::BI::L ?
if ($trace) {
require Math::BigInt::Trace;
$class = 'Math::BigInt::Trace';
$upgrade = 'Math::BigFloat::Trace';
}
else {
# see if we can find Math::BigInt::Lite
if (!defined $a && !defined $p) { # rounding won't work to well
local @INC = @INC;
pop @INC if $INC[-1] eq '.';
if (eval { require Math::BigInt::Lite; 1 }) {
@import = (); # :constant in Lite, not MBI
Math::BigInt::Lite->import(':constant');
$_lite = 1; # signal okay
}
}
require Math::BigInt if $_lite == 0; # not already loaded?
$class = 'Math::BigInt'; # regardless of MBIL or not
}
push @import, $lib_kind => $lib if $lib ne '';
# Math::BigInt::Trace or plain Math::BigInt
$class->import(@import, upgrade => $upgrade);
if ($trace) {
require Math::BigFloat::Trace;
$class = 'Math::BigFloat::Trace';
$downgrade = 'Math::BigInt::Trace';
}
else {
require Math::BigFloat;
$class = 'Math::BigFloat';
}
$class->import(':constant', 'downgrade', $downgrade);
bignum->accuracy($a) if defined $a;
bignum->precision($p) if defined $p;
if ($ver) {
print "bignum\t\t\t v$VERSION\n";
print "Math::BigInt::Lite\t v$Math::BigInt::Lite::VERSION\n" if $_lite;
print "Math::BigInt\t\t v$Math::BigInt::VERSION";
my $config = Math::BigInt->config();
print " lib => $config->{lib} v$config->{lib_version}\n";
print "Math::BigFloat\t\t v$Math::BigFloat::VERSION\n";
exit;
}
# Take care of octal/hexadecimal constants
overload::constant binary =>
sub {
bigint::_binary_constant(shift);
};
# if another big* was already loaded:
my ($package) = caller();
no strict 'refs';
if (!defined *{"${package}::inf"}) {
$self->export_to_level(1, $self, @a); # export inf and NaN
}
}
sub PI () { Math::BigFloat->new('3.141592653589793238462643383279502884197'); }
sub e () { Math::BigFloat->new('2.718281828459045235360287471352662497757'); }
sub bpi ($) { Math::BigFloat->bpi(@_); }
sub bexp ($$) {
my $x = Math::BigFloat->new($_[0]);
$x->bexp($_[1]);
}
1;
__END__
=pod
=head1 NAME
bignum - Transparent BigNumber support for Perl
=head1 SYNOPSIS
use bignum;
$x = 2 + 4.5,"\n"; # BigFloat 6.5
print 2 ** 512 * 0.1,"\n"; # really is what you think it is
print inf * inf,"\n"; # prints inf
print NaN * 3,"\n"; # prints NaN
{
no bignum;
print 2 ** 256,"\n"; # a normal Perl scalar now
}
# for older Perls, import into current package:
use bignum qw/hex oct/;
print hex("0x1234567890123490"),"\n";
print oct("01234567890123490"),"\n";
=head1 DESCRIPTION
All operators (including basic math operations) are overloaded. Integer and
floating-point constants are created as proper BigInts or BigFloats,
respectively.
If you do
use bignum;
at the top of your script, Math::BigFloat and Math::BigInt will be loaded
and any constant number will be converted to an object (Math::BigFloat for
floats like 3.1415 and Math::BigInt for integers like 1234).
So, the following line:
$x = 1234;
creates actually a Math::BigInt and stores a reference to in $x.
This happens transparently and behind your back, so to speak.
You can see this with the following:
perl -Mbignum -le 'print ref(1234)'
Don't worry if it says Math::BigInt::Lite, bignum and friends will use Lite
if it is installed since it is faster for some operations. It will be
automatically upgraded to BigInt whenever necessary:
perl -Mbignum -le 'print ref(2**255)'
This also means it is a bad idea to check for some specific package, since
the actual contents of $x might be something unexpected. Due to the
transparent way of bignum C<ref()> should not be necessary, anyway.
Since Math::BigInt and BigFloat also overload the normal math operations,
the following line will still work:
perl -Mbignum -le 'print ref(1234+1234)'
Since numbers are actually objects, you can call all the usual methods from
BigInt/BigFloat on them. This even works to some extent on expressions:
perl -Mbignum -le '$x = 1234; print $x->bdec()'
perl -Mbignum -le 'print 1234->copy()->binc();'
perl -Mbignum -le 'print 1234->copy()->binc->badd(6);'
perl -Mbignum -le 'print +(1234)->copy()->binc()'
(Note that print doesn't do what you expect if the expression starts with
'(' hence the C<+>)
You can even chain the operations together as usual:
perl -Mbignum -le 'print 1234->copy()->binc->badd(6);'
1241
Under bignum (or bigint or bigrat), Perl will "upgrade" the numbers
appropriately. This means that:
perl -Mbignum -le 'print 1234+4.5'
1238.5
will work correctly. These mixed cases don't do always work when using
Math::BigInt or Math::BigFloat alone, or at least not in the way normal Perl
scalars work.
If you do want to work with large integers like under C<use integer;>, try
C<use bigint;>:
perl -Mbigint -le 'print 1234.5+4.5'
1238
There is also C<use bigrat;> which gives you big rationals:
perl -Mbigrat -le 'print 1234+4.1'
12381/10
The entire upgrading/downgrading is still experimental and might not work
as you expect or may even have bugs. You might get errors like this:
Can't use an undefined value as an ARRAY reference at
/usr/local/lib/perl5/5.8.0/Math/BigInt/Calc.pm line 864
This means somewhere a routine got a BigFloat/Lite but expected a BigInt (or
vice versa) and the upgrade/downgrad path was missing. This is a bug, please
report it so that we can fix it.
You might consider using just Math::BigInt or Math::BigFloat, since they
allow you finer control over what get's done in which module/space. For
instance, simple loop counters will be Math::BigInts under C<use bignum;> and
this is slower than keeping them as Perl scalars:
perl -Mbignum -le 'for ($i = 0; $i < 10; $i++) { print ref($i); }'
Please note the following does not work as expected (prints nothing), since
overloading of '..' is not yet possible in Perl (as of v5.8.0):
perl -Mbignum -le 'for (1..2) { print ref($_); }'
=head2 Options
bignum recognizes some options that can be passed while loading it via use.
The options can (currently) be either a single letter form, or the long form.
The following options exist:
=over 2
=item a or accuracy
This sets the accuracy for all math operations. The argument must be greater
than or equal to zero. See Math::BigInt's bround() function for details.
perl -Mbignum=a,50 -le 'print sqrt(20)'
Note that setting precision and accuracy at the same time is not possible.
=item p or precision
This sets the precision for all math operations. The argument can be any
integer. Negative values mean a fixed number of digits after the dot, while
a positive value rounds to this digit left from the dot. 0 or 1 mean round to
integer. See Math::BigInt's bfround() function for details.
perl -Mbignum=p,-50 -le 'print sqrt(20)'
Note that setting precision and accuracy at the same time is not possible.
=item t or trace
This enables a trace mode and is primarily for debugging bignum or
Math::BigInt/Math::BigFloat.
=item l or lib
Load a different math lib, see L<Math Library>.
perl -Mbignum=l,GMP -e 'print 2 ** 512'
Currently there is no way to specify more than one library on the command
line. This means the following does not work:
perl -Mbignum=l,GMP,Pari -e 'print 2 ** 512'
This will be hopefully fixed soon ;)
=item hex
Override the built-in hex() method with a version that can handle big
numbers. This overrides it by exporting it to the current package. Under
Perl v5.10.0 and higher, this is not so necessary, as hex() is lexically
overridden in the current scope whenever the bignum pragma is active.
=item oct
Override the built-in oct() method with a version that can handle big
numbers. This overrides it by exporting it to the current package. Under
Perl v5.10.0 and higher, this is not so necessary, as oct() is lexically
overridden in the current scope whenever the bigint pragma is active.
=item v or version
This prints out the name and version of all modules used and then exits.
perl -Mbignum=v
=back
=head2 Methods
Beside import() and AUTOLOAD() there are only a few other methods.
Since all numbers are now objects, you can use all functions that are part of
the BigInt or BigFloat API. It is wise to use only the bxxx() notation, and not
the fxxx() notation, though. This makes it possible that the underlying object
might morph into a different class than BigFloat.
=head2 Caveats
But a warning is in order. When using the following to make a copy of a number,
only a shallow copy will be made.
$x = 9; $y = $x;
$x = $y = 7;
If you want to make a real copy, use the following:
$y = $x->copy();
Using the copy or the original with overloaded math is okay, e.g. the
following work:
$x = 9; $y = $x;
print $x + 1, " ", $y,"\n"; # prints 10 9
but calling any method that modifies the number directly will result in
B<both> the original and the copy being destroyed:
$x = 9; $y = $x;
print $x->badd(1), " ", $y,"\n"; # prints 10 10
$x = 9; $y = $x;
print $x->binc(1), " ", $y,"\n"; # prints 10 10
$x = 9; $y = $x;
print $x->bmul(2), " ", $y,"\n"; # prints 18 18
Using methods that do not modify, but test the contents works:
$x = 9; $y = $x;
$z = 9 if $x->is_zero(); # works fine
See the documentation about the copy constructor and C<=> in overload, as
well as the documentation in BigInt for further details.
=over 2
=item inf()
A shortcut to return Math::BigInt->binf(). Useful because Perl does not always
handle bareword C<inf> properly.
=item NaN()
A shortcut to return Math::BigInt->bnan(). Useful because Perl does not always
handle bareword C<NaN> properly.
=item e
# perl -Mbignum=e -wle 'print e'
Returns Euler's number C<e>, aka exp(1).
=item PI()
# perl -Mbignum=PI -wle 'print PI'
Returns PI.
=item bexp()
bexp($power,$accuracy);
Returns Euler's number C<e> raised to the appropriate power, to
the wanted accuracy.
Example:
# perl -Mbignum=bexp -wle 'print bexp(1,80)'
=item bpi()
bpi($accuracy);
Returns PI to the wanted accuracy.
Example:
# perl -Mbignum=bpi -wle 'print bpi(80)'
=item upgrade()
Return the class that numbers are upgraded to, is in fact returning
C<$Math::BigInt::upgrade>.
=item in_effect()
use bignum;
print "in effect\n" if bignum::in_effect; # true
{
no bignum;
print "in effect\n" if bignum::in_effect; # false
}
Returns true or false if C<bignum> is in effect in the current scope.
This method only works on Perl v5.9.4 or later.
=back
=head2 Math Library
Math with the numbers is done (by default) by a module called
Math::BigInt::Calc. This is equivalent to saying:
use bignum lib => 'Calc';
You can change this by using:
use bignum lib => 'GMP';
The following would first try to find Math::BigInt::Foo, then
Math::BigInt::Bar, and when this also fails, revert to Math::BigInt::Calc:
use bignum lib => 'Foo,Math::BigInt::Bar';
Please see respective module documentation for further details.
Using C<lib> warns if none of the specified libraries can be found and
L<Math::BigInt> did fall back to one of the default libraries.
To suppress this warning, use C<try> instead:
use bignum try => 'GMP';
If you want the code to die instead of falling back, use C<only> instead:
use bignum only => 'GMP';
=head2 INTERNAL FORMAT
The numbers are stored as objects, and their internals might change at anytime,
especially between math operations. The objects also might belong to different
classes, like Math::BigInt, or Math::BigFloat. Mixing them together, even
with normal scalars is not extraordinary, but normal and expected.
You should not depend on the internal format, all accesses must go through
accessor methods. E.g. looking at $x->{sign} is not a bright idea since there
is no guaranty that the object in question has such a hashkey, nor is a hash
underneath at all.
=head2 SIGN
The sign is either '+', '-', 'NaN', '+inf' or '-inf' and stored separately.
You can access it with the sign() method.
A sign of 'NaN' is used to represent the result when input arguments are not
numbers or as a result of 0/0. '+inf' and '-inf' represent plus respectively
minus infinity. You will get '+inf' when dividing a positive number by 0, and
'-inf' when dividing any negative number by 0.
=head1 CAVEATS
=over 2
=item Operator vs literal overloading
C<bignum> works by overloading handling of integer and floating point
literals, converting them to L<Math::BigInt> or L<Math::BigFloat>
objects.
This means that arithmetic involving only string values or string
literals will be performed using Perl's built-in operators.
For example:
use bignum;
my $x = "900000000000000009";
my $y = "900000000000000007";
print $x - $y;
will output C<0> on default 32-bit builds, since C<bigrat> never sees
the string literals. To ensure the expression is all treated as
C<Math::BigInt> or C<BigFloat> objects, use a literal number in the
expression:
print +(0+$x) - $y;
=item in_effect()
This method only works on Perl v5.9.4 or later.
=item hex()/oct()
C<bigint> overrides these routines with versions that can also handle
big integer values. Under Perl prior to version v5.9.4, however, this
will not happen unless you specifically ask for it with the two
import tags "hex" and "oct" - and then it will be global and cannot be
disabled inside a scope with "no bigint":
use bigint qw/hex oct/;
print hex("0x1234567890123456");
{
no bigint;
print hex("0x1234567890123456");
}
The second call to hex() will warn about a non-portable constant.
Compare this to:
use bigint;
# will warn only under older than v5.9.4
print hex("0x1234567890123456");
=back
=head1 MODULES USED
C<bignum> is just a thin wrapper around various modules of the Math::BigInt
family. Think of it as the head of the family, who runs the shop, and orders
the others to do the work.
The following modules are currently used by bignum:
Math::BigInt::Lite (for speed, and only if it is loadable)
Math::BigInt
Math::BigFloat
=head1 EXAMPLES
Some cool command line examples to impress the Python crowd ;)
perl -Mbignum -le 'print sqrt(33)'
perl -Mbignum -le 'print 2*255'
perl -Mbignum -le 'print 4.5+2*255'
perl -Mbignum -le 'print 3/7 + 5/7 + 8/3'
perl -Mbignum -le 'print 123->is_odd()'
perl -Mbignum -le 'print log(2)'
perl -Mbignum -le 'print exp(1)'
perl -Mbignum -le 'print 2 ** 0.5'
perl -Mbignum=a,65 -le 'print 2 ** 0.2'
perl -Mbignum=a,65,l,GMP -le 'print 7 ** 7777'
=head1 BUGS
Please report any bugs or feature requests to
C<bug-math-bigint at rt.cpan.org>, or through the web interface at
L<https://rt.cpan.org/Ticket/Create.html?Queue=bignum> (requires login).
We will be notified, and then you'll automatically be notified of
progress on your bug as I make changes.
=head1 SUPPORT
You can find documentation for this module with the perldoc command.
perldoc bignum
You can also look for information at:
=over 4
=item * RT: CPAN's request tracker
L<https://rt.cpan.org/Public/Dist/Display.html?Name=bignum>
=item * AnnoCPAN: Annotated CPAN documentation
L<http://annocpan.org/dist/bignum>
=item * CPAN Ratings
L<http://cpanratings.perl.org/dist/bignum>
=item * Search CPAN
L<http://search.cpan.org/dist/bignum/>
=item * CPAN Testers Matrix
L<http://matrix.cpantesters.org/?dist=bignum>
=back
=head1 LICENSE
This program is free software; you may redistribute it and/or modify it under
the same terms as Perl itself.
=head1 SEE ALSO
L<bigint> and L<bigrat>.
L<Math::BigInt>, L<Math::BigFloat>, L<Math::BigRat> and L<Math::Big> as well as
L<Math::BigInt::FastCalc>, L<Math::BigInt::Pari> and L<Math::BigInt::GMP>.
=head1 AUTHORS
=over 4
=item *
(C) by Tels L<http://bloodgate.com/> in early 2002 - 2007.
=item *
Maintained by Peter John Acklam E<lt>pjacklam@gmail.com<gt>, 2014-.
=back
=cut
