SNMP-USM-HMAC-SHA2-MIB DEFINITIONS ::= BEGIN
IMPORTS
MODULE-IDENTITY, OBJECT-IDENTITY,
mib-2 FROM SNMPv2-SMI -- RFC 2578
snmpAuthProtocols FROM SNMP-FRAMEWORK-MIB; -- RFC 3411
snmpUsmHmacSha2MIB MODULE-IDENTITY
LAST-UPDATED "201604180000Z" -- 18 April 2016, midnight
ORGANIZATION "SNMPv3 Working Group"
CONTACT-INFO "WG email: OPSAWG@ietf.org
Subscribe:
https://www.ietf.org/mailman/listinfo/opsawg
Editor: Johannes Merkle
secunet Security Networks
Postal: Mergenthaler Allee 77
D-65760 Eschborn
Germany
Phone: +49 20154543091
Email: johannes.merkle@secunet.com
Co-Editor: Manfred Lochter
Bundesamt fuer Sicherheit in der
Informationstechnik (BSI)
Postal: Postfach 200363
D-53133 Bonn
Germany
Phone: +49 228 9582 5643
Email: manfred.lochter@bsi.bund.de"
DESCRIPTION
"Definitions of Object Identities needed for the use of
HMAC-SHA2 Authentication Protocols by SNMP's User-based Security
Model.
Copyright (c) 2016 IETF Trust and the persons identified as
authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with or
without modification, is permitted pursuant to, and subject
to the license terms contained in, the Simplified BSD License
set forth in Section 4.c of the IETF Trust's Legal Provisions
Relating to IETF Documents
(http://trustee.ietf.org/license-info)."
REVISION "201604180000Z" -- 18 April 2016, midnight
DESCRIPTION
"Version correcting the MODULE-IDENTITY value,
published as RFC 7860"
REVISION "201510140000Z" -- 14 October 2015, midnight
DESCRIPTION
"Initial version, published as RFC 7630"
::= { mib-2 235 }
usmHMAC128SHA224AuthProtocol OBJECT-IDENTITY
STATUS current
DESCRIPTION "The Authentication Protocol
usmHMAC128SHA224AuthProtocol uses HMAC-SHA-224 and
truncates output to 128 bits."
REFERENCE "- Krawczyk, H., Bellare, M., and R. Canetti,
HMAC: Keyed-Hashing for Message Authentication,
RFC 2104.
- National Institute of Standards and Technology,
Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
::= { snmpAuthProtocols 4 }
usmHMAC192SHA256AuthProtocol OBJECT-IDENTITY
STATUS current
DESCRIPTION "The Authentication Protocol
usmHMAC192SHA256AuthProtocol uses HMAC-SHA-256 and
truncates output to 192 bits."
REFERENCE "- Krawczyk, H., Bellare, M., and R. Canetti,
HMAC: Keyed-Hashing for Message Authentication,
RFC 2104.
- National Institute of Standards and Technology,
Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
::= { snmpAuthProtocols 5 }
usmHMAC256SHA384AuthProtocol OBJECT-IDENTITY
STATUS current
DESCRIPTION "The Authentication Protocol
usmHMAC256SHA384AuthProtocol uses HMAC-SHA-384 and
truncates output to 256 bits."
REFERENCE "- Krawczyk, H., Bellare, M., and R. Canetti,
HMAC: Keyed-Hashing for Message Authentication,
RFC 2104.
- National Institute of Standards and Technology,
Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
::= { snmpAuthProtocols 6 }
usmHMAC384SHA512AuthProtocol OBJECT-IDENTITY
STATUS current
DESCRIPTION "The Authentication Protocol
usmHMAC384SHA512AuthProtocol uses HMAC-SHA-512 and
truncates output to 384 bits."
REFERENCE "- Krawczyk, H., Bellare, M., and R. Canetti,
HMAC: Keyed-Hashing for Message Authentication,
RFC 2104.
- National Institute of Standards and Technology,
Secure Hash Standard (SHS), FIPS PUB 180-4, 2012."
::= { snmpAuthProtocols 7 }
END
